CẤU HÌNH CLAUDE DESKTOP ĐỌC/TỔNG HỢP EMAIL TỪ EXCHANGE SERVER

1. Cài bộ Cdata Code Assist MCP for Exchange, rồi bắt đầu cấu hình

Cấu hình Exchange version, 2016/2019 vẫn dùng chung 2013_SP1 được

Khai báo đường dẫn Exchange EWS

Bấm Save & Test. Nếu khai báo đúng sẽ báo successful.

Bấm Next qua bước tiếp theo
2. Chọn AI MCP tool:

Chọn AI MCP phù hợp (vd: Claude Desktop). Bấm Save

3. Nếu gặp lỗi không thể save configure thì có thể do Claude Desktop cập nhật đường dẫn chứa file config

Để khắc phục: tạo lại link bằng lệnh sau:

mklink /D "C:\Users\{username}\AppData\Roaming\Claude" "C:\Users\{username}\AppData\Local\Packages\Claude_pzs8sxrjxfjjc\LocalCache\Roaming\Claude".

4. Lúc này là đã cấu hình xong MCP server, có thể bấm Close. Sau đó khởi động lại Claude Deskop

Claude Desktop sẽ tự nhận thấy MCP Server trong quá trình khởi động. Để kiểm tra Claude Desltop đã kết nối MCP Server, bạn vào Settings - Developer

Comments

[RAID] SWITCH FROM AHCI TO RAID WITH INTEL C600 CONTROLLER

I personally have used other ways to do this. Manipulating some registry settings in combination with a safe boot before booting normally does the trick as well. This works with both SATA SSD and M.2 NVMe drives and it enables relatively fast switching between back and forth between AHCI and RAID. I have described this method below. I have also tried the same process used to switch from RAD to AHCI and that works as well. Switch to safe boot Reboot into BIOS Change from AHCI to RAID in the BIOS Boot into safe mode Turn off safe mode and reboot normally again Nothing else and that also did the trick, just like with moving from RAID to AHCI. So the link above and my step by step below is here for completeness. You have options in case one of them doesn’t work! Step by step AHCI to RAID registry method This procedure I describe below works on Windows 10 1803/1809 and has been tested on Dell Latitude E6220 an XPS 13 9360. Editing the registry is...

TẠO DKIM RECORD CHO EXCHANGE SERVER

Source: https://www.linkedin.com/pulse/how-configure-dkim-exchange-2019-simple-way-seyed-abdollahi Installation In Exchange Online DKIM is a built-in service, but on an on-prem Exchange 2019 deployment we need a 3rd party application to add this functionality to our Exchange infrastructure. In this guide we use Stefan Profanter's excellent dkim-exchange application for this purpose, which is available here: https://github.com/Pro/dkim-exchange/releases/latest After installing the program, we open Configuration.DkimSigner.exe and click on the "Install" button, or download the installer straight from https://codeload.github.com/Pro/dkim-exchange/legacy.zip/v*** Configuration After installation finished, open the configurator. C:\Program Files\Exchange DkimSigner\Configuration.DkimSigner.exe Click on the "Configure" button and move the DkimSigner agent to the very bottom of the list. Under the DKIM settings tab select relaxed canonicalization as Exchange t...

CÀI ĐẶT OPEN PROJECT

Cài trên Ubuntu 22.04 https://www.openproject.org/docs/installation-and-operations/installation/packaged/ Ubuntu 22.04 Update the apt package index and install packages to allow apt to use a repository over HTTPS: sudo apt-get update sudo apt-get install apt-transport-https ca-certificates wget Import the PGP key used to sign our packages: sudo wget -O /etc/apt/trusted.gpg.d/openproject.asc https://dl.packager.io/srv/opf/openproject/key Add the OpenProject package source: sudo wget -O /etc/apt/sources.list.d/openproject.list \ https://dl.packager.io/srv/opf/openproject/stable/16/installer/ubuntu/22.04.repo Download the OpenProject package: sudo apt-get update sudo apt-get install openproject Cài xong qua tiếp bước Configure: To start the configuration wizard, please run the following command with sudo , or as root: sudo openproject reconfigure #interactive - manual choices are stored in /etc/openproject/installer.dat sudo openproject configure ...

ITEXVN

Search This Blog